Ip67 Control panel, potentiometer pressure control
Every 20° locability for easy operate
Auxillary Hose Reel
Hydraulic or manuel rotating
½ ‘’ 80 m & ¾ ‘’ 50 m hose capacity
Automatic hose guide for excellent winding
Equipped with washing gun 45 lmp @150 bar
Suction Hose Reel With Fixed Boom
4’’ 20 m & 5’’ 16 & 6’’ 12 m suction hose reel capacity
270° operating area
Teleskopic boom, 1300 mm extendable,
-5°/+35° vertical movement
Suction Hose Reel With Seperated Boom
4’’ 20 m & 5’’ 15 m & 6’’ 10 m suction hose reel capacity
180° operating area
Teleskopic boom, 1350 mm extendable,
-5°/+35° vertical movement
Suction Boom
4’’ & 5’’ & 6’’ and 8’’
300 operating area
Teleskopic boom, 1350 mm extendable
-13/ +40 vertical movement
Galvanized anti-corrosion construction
Wireless or cable control option
Stowage Systems
Equipment compartments on both sides
Fitting table for Nozzle safety
All equipment located determined position
Lighting System
High performed LED signalization lightings for traffic safety
High performance LED projector located on 2 unit rear lid, 1 unit main hose reel, 1 unit suction boom and pump compartments
Vacuum Tank Inside Washing System
Located on the between the every two breakwaters inside of waste water tank
Every area of tank washing by special nozzle bar @170 bar
Pump Compartments
Both pumps positioned protected area on sides of the vehicle or between vehicle cab and tank
Anti Freezing System
Efemmak vehicle has an anti-freezing system to protect water freezing in the pipes of the system whenever the vehicle is moving or not operating. Water inside the tank s pumped through a water suction and delivery line which consists of a high pressure water pump, a pressure regulator and channel hoses.
Heating system capable to operating with low temperature such as -25/-30 C.
One or Two serial mounted water pumps be used for water pumping.
Pumps are 24/12V DC electrical driven type. Heater has a min capacity of 6 kW.
On/Off control of the heater done by means of an electrical system.
Jetting Nozzles
Made of wear-resistant, Cr Ni 316 stainless steel, provided with front jet insert and blind plug interchangeable. Angle of jet backwards, sturdy wall thickness, long service life and a minimum of wear and tear. Some of types are provided with steelceramic inserts. Because of this, the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer.
SCT
Efemmak signed design for SCT vehicles Painted by request of customer name located
Special design for SCT type Combined Sewer Opening and Cleaning Tools signed by Efemmak